hangar door on aircraft hangar florida

Hydraulic DoorsHigher Power Doors
Bifold DoorsBottom Rolling Doors


hangar door on aircraft hangar in florida

Send me a Quote

Receive our Newsletter

Call us 866-226-3667

AeroDoor Monthly Newsletter Request          


Cancel and return to AeroDoor Homepage



bottom rolling door manufacturer for aircraft hangar door
bottom rolling door engineer for aircraft hangar door
bottom rolling door drive system for aircraft hangar door
bottom rolling door on aircraft hangar for aircraft hangar door

Engineering & Design

By working with architects, engineers, and project managers during the design and specification phase of a project, we can assure the owner of meeting specific objectives and requirements of the project.

High Movement Tolerance

Exclusive use of structural wide flange beams for top track assembly and telescoping top guide hardware, assures integrity of the door opening even during extreme vertical deflection of the building.

Motor Operation

All our motor driven door systems are available with a wide range of options including: variable frequency drive, soft starts, linear cable drive system, safety edges, inner lock switching, door in motion indicators and remotes.

Sheeting & Insulation

Individual engineering and design allows for the use of standard architectural panels, insulated panels, flat sheeting or heavy plate material, windows and louvres.

bottom rolling door seals on aircraft hangar
bottom rolling door strength for aircraft hangar door
bottom rolling door configuration for aircraft hangar door
 

Seal & Insulation

We offer a wide range of weather-stripping options to close off the hangar doors at the top, bottom, and between each door jamb.

The Hurricane Survivor

Aero bottom rolling doors can be specified in environments where high winds and hurricanes can be expected.

Wide Range of Door Options

We offer a range of options for all doors including: tail doors, aperture doors with inflatable seals, man-doors, windows and highly specified motor operation systems to meet individual requirement.

 

Single Slide Left

For applications where larger panels are desired or a maximum width door in a given width. This layout combines all available stacking room to one side of the hangar.

Single Slide Right

For applications where larger panels are desired or a maximum width door in a given width. This layout combines all available stacking room to one side of the hangar.

90° Door System

Minimum loss of opening to your hangar because door panels are stored on the inside edge of the hangar.

All Moving / Free Floating

For applications needing maximum flexibility in larger hangars allowing multiple aircraft without using stacking packets. Simply move all panels to the side of the hangar when not in use.

 

Bi-Parting w/ Stack Pockets (North)


For applications where the main building structure is not wide enough to allow doors to stack.



Rails are protected from ice and snow. 4 panels are shown but more can be used.

Bi-Parting w/ Stack Pockets (South)


For applications where the main building structure is not wide enough to allow doors to stack.



Rails are protected from ice and snow. 4 panels are shown but more can be used.

Outside Stack w/ Support Columns for Top Track


For applications in warmer climates where ice and snow build up are not a problem.



This layout provides maximum door width without the expense of door pockets.

 

 

Bottom Rolling Doors

 

Aero Door has bottom rolling doors in existence that date back over 30-years, our reputation for durability and reliability is respected across the globe. With this we proudly embrace a tradition for innovation that is unrivaled in the design, manufacture and erection of large sliding doors for buildings, in particular aircraft hangars.

 

Every bottom rolling door is a special design because size, configuration, sheeting and options are different for every client. From the initial meeting with AeroDoor we endeavor to meet your requirements and specifications and offer ways to improve efficiency and reduce capital costs where possible.

 

Most components for our doors are manufactured by Aero Door, to deliver consistently high quality components that are time proven, trouble free and no compromise in quality. Furthermore we inspect every mechanical component before delivery.

 

Installation can be controlled by our own engineers and installation crew, or we can oversee your own team of installers who will erect the door.

 

Visit our Bottom Rolling Door FAQ's section to learn more.

 

 

 

 

 

 

 

Quotation Request

 : Bottom Rolling Door

* Denotes a mandatory field.

Name:

   *

Company Name:

     

Zip:

   *

eMail:

   *

Phone:

   *

Door Type:

 

Select Application:

 

Opening Width:

     

Opening Height:

     

Building Brand:

     

Heard About Us:

    
 

Circumstances:

    

Notes and Questions:

 

Useful Downloads



 

AeroDoor HQ:


AeroDoor International, LLC.

2036 Apex Court. Suite A

Apopka, Florida. 32703.



Manufacturing:


Florida | Wisconsin | Alabama

AeroDoor can deliver to any location.



Sales & Service:


Phone: 1.407.654.0591

Toll Free: 1.866.226.3667

International 001.407.654.0591

Fax: 1.407.464.0893